Publication List

Peer reviewed journal publication list


44. Choi, M., Chu, I.C., Kim, S., Jeon, B.G., Jo, H.J., “Direct observation of rewetting failure mechanism at CHF under different subcooled flows,” International Journal of Heat and Mass Transfer, Vol. 163, 2020, 120465.


43. Han, T., Choi, Y., Kwon, J.T., Kim, M.H., Jo, H.J., “Evaporation-Crystallization Method to Promote Coalescence-Induced Jumping on Superhydrophobic Surfaces,” Langmuir, Vol. 36, 2020, pp. 9843-9848.


42. Kim, N., Kim, H., Eoh, J., Kim, M.H., Jo, H.J., “One-dimensional design approach to integrated steam generator with helical-coil tube bundles for a sodium-cooled fast reactor,” Nuclear Engineering and Design, Vol. 361, 2020, 110554.


41. Park, J.H., Kwon, J.G., Kim, T.H., Kim, M.H., Cha, J.E., Jo, H.J., “Experimental study of a straight channel printed circuit heat exchanger on supercritical CO2 near the critical point with water cooling,” International Journal of Heat and Mass Transfer, Vol. 150, 2020, 119364.


40. Lee, G.C., Kim, S.H., Kang, J., Kim, M.H., Jo, H.J., “Leidenfrost temperature on porous wick surfaces: Decoupling the effects of the capillary wicking and thermal properties,” International Journal of Heat and Mass Transfer, Vol. 145, 2019, 118809.


39. Lee, G.C., Kim, T.K., Kang, J., Jo, H.J., Kim, M.H., “Development of anodization technique on zirconium silicide material for reproducing micro/nanosurface structure: Application to nuclear accident tolerant fuel cladding,” Surface and Coatings Technology, Vol. 374, 2019, pp.171.


38. Jo, H.J., Yeom, H., E. Gutierrez, Sridharan, K., Corradini, M.L., “Evaluation of critical heat flux of ATF candidate coating materials in pool boiling,” Nuclear Engineering and Design, Vol. 354, 2019, pp.1.


37. Lee, G.C., Noh, H., Yeom, H., Jo, H.J., Kim, T.K., Kim, M., Sridharan, K., Park, H.J., “Zirconium-silicide coating on zircaloy-4 substrate for accident tolerance: Effects on oxidation resistance and boiling,” Annals of Nuclear Energy, Vol. 126, 2019, pp.350.


36. Kang, J., Kim, T.K., Lee, G.C., Jo, H.J., Kim, M.H., Park, H.J., “Impact of system parameters on quenching heat transfer in the candidate materials for accident tolerant fuel-cladding in LWRs,” Annals of Nuclear Energy, Vol. 129, 2019, pp.375.


35. Jo, H.J., Wang, J., Corradini, M.L., “Stratified steam explosion energetics,” Nuclear Engineering and Technology, Vol. 51, 2019, pp.95.


34. Jo, H.J., Yeom, H., Yoon, D.S., Duarte, J.P., Corradini, M.L., “Minimum heat flux (MHF) behavior with different surface characteristics including structured surfaces and different surface energies,” International Journal of Heat and Mass Transfer, Vol. 127, Part A, 2018 pp. 414.


33. Duarte, J.P., Zhao, D., Jo, H.J., Corradini, M.L., “Critical heat flux experiments and a post-CHF heat transfer analysis using 2D inverse heat transfer,” Nuclear Engineering and Design, Vol. 337, 2018, pp.17.


32. King, J.L., Jo, H.J., Shahsafi, A., Blomstrand, K., Sridharan, K., Kats, M.A., “Impact of corrosion on the emissivity of advanced reactor structural alloys,” Journal of Nuclear Materials, Vol. 508, 2018, pp.465.


31. Noh, H., Kim, J.M., Jo, H.J., Park, H.S., Hwang, D.K., Kim, M.H., “Effect of surface structure and coating on the heat transfer deflection behavior in the early stage of nucleate boiling,” International Journal of Heat and Mass Transfer, Vol. 126, 2018, pp.1315.


30. Wang, J., Jo, H.J., Corradini, M., “Potential recovery actions from a severe accident in a PWR: MELCOR analysis of a station blackout scenario,” Nuclear Technology, 2018, pp.1(Online published).


29. Yoon, D.S., Jo, H.J., Corradini, M., “CFD modeling of filmwise steam condensation with noncondensable gas with modified boundary condition,” International Journal of Heat and Mass Transfer, Vol. 125, 2018, pp. 485.


28. Yeom, H., Jo, H.J., Johnson, G., Sridharan, K., Corradini, M., “Transient pool boiling heat transfer of oxidized and roughened Zircaloy-4 surfaces during water quenching,” International Journal of Heat and Mass Transfer, Vol. 120, 2018, pp. 435.


27. Jo, H.J., King, J.L., Blomstrand, K., Sridharan, K., “Spectral emissivity of oxidized and roughened metal surfaces,” International Journal of Heat and Mass Transfer, Vol. 115, 2017, pp. 1065.


26. King, J.L., Jo, H.J., Tirawat, R., Blomstrand, K., Sridharan, K., “Effects of surface roughness, oxidation, and temperature on emissivity for reactor pressure vessel alloys,” Nuclear Technology, Vol. 200,2017, pp. 1.


25. King, J.L., Jo, H.J., Loyalka, S.K., Tompson, R.V., Sridharan, K., “Computation of total hemispherical emissivity from directional spectral models,” International Journal of Heat and Mass Transfer, Vol. 109, 2017, pp. 894.


24. Yoon, D.S., Jo, H.J., Corradini, M.L., “Assessment of MELCOR condensation models with the presence of non-condensable gas in natural convection flow regime,” Nuclear Engineering and Design, Vol. 317, 2017, pp. 110.


23. Yoon, D.S., Jo, H.J., Fu, W., Mullin, M.M., Corradini, M.L., “MELCOR Analysis of OSU multi-application small light water reactor (MASLWR) experiment on containment condensation,” Nuclear Technology, Vol. 198, 2017, pp. 277.


22. Jo, H.J., Park, H.S., Kim, M.H., “Single bubble dynamics on hydrophobic-hydrophilic mixed surfaces,” International Journal of Heat and Mass Transfer, Vol. 93, 2016, pp. 554.


21. Hwang, K.W., Kim, D.H., Jo, H.J., Park, H.S., Moriyama, K., Kim, M.H., “Effects of heat flux on dropwise condensation on a superhydrophobic surface,” Journal of Mechanical Science and Technology, Vol. 30,2016, pp. 2141.


20. Kang, J., Kim, S.H., Jo, H.J., Park, G., Ahn, H.S., Moriyama, K., Kim, M.H., Park, H.S., “Film boiling heat transfer on a completely wettable surface with atmospheric saturated distilled water quenching,” International Journal of Heat and Mass Transfer, Vol 93, 2016, pp. 67. 


19. Jo, H.J.*, Hwang, K. W.*, Kim, D.H., Kiyofumi, M., Park, H.S., Kim, M.H., Ahn, H.S., “Loss of superhydrophobicity of hydrophobic micro/nano structures during condensation,” Scientific Reports, Vol. 5, 2015, pp. 9901.


18. Jo, H.J.*, Yu, D.I.*, Noh, H., Park, H.S., Kim, M.H., “Boiling on spatially controlled heterogeneous surfaces: Wettability patterns on microstructures,” Applied Physics Letters, Vol. 106, 2015, 181602.


17. Jo, H.J., Kim, J.M., Yeom, H., Lee, G.C., Park, H.S., Kiyofumi, M., Kim, M.H., Sridharan, K., Corradini, M., “Boiling performance and material robustness of modified surfaces with multi scale structures for fuel cladding development,” Nuclear Engineering and Design, Vol. 291, 2015, pp. 204-211.


16. Jo, H.J., Noh, H., Kaviany, M., Kim, J.M., Kim, M.H., Ahn, H.S., “Tunable, self-assembled 3D reduced graphene oxide structures fabricated via boiling,” Carbon, Vol.81, 2015, pp.357-366.


15. Jo, H.J., Kaviany, M., Kim, S.H., Kim, M.H., “Heterogeneous bubble nucleation on ideally-smooth horizontal heated surface,” International Journal of Heat and Mass Transfer, Vol.71, 2014, pp.149-157.


14. Jo, H.J., Kim, S.H., Park, H.S., Kim, M.H., “Critical heat flux and nucleate boiling on several heterogeneous wetting surfaces: Controlled hydrophobic patterns on a hydrophilic substrate,” International Journal of Multiphase Flow, Vol. 62, 2014, pp. 101-109.


13. Ahn, H.S., Kim, J.M., Kim, J.M., Park, S.C., Hwang, K., Jo, H.J., Kim, T.J., Jerng, D.W., Kaviany, M.,  Kim, M.H., “Boiling characteristics on the reduced graphene oxide films,” Experimental Thermal and Fluid Science, Vol. 60, 2014, pp.361-366.


12. Ahn, H.S., Kim, J.M., Kim, T., Park, S.C., Kim, J.M., Park, Y., Yu, D.I., Hwang, K.W., Jo, H.J., Park, S.H., Kim, H., Kim, M.H., “Enhanced heat transfer is dependent on thickness of graphene films: the heat dissipation during boiling,” Scientific Reports, Vol. 4, 2014.


11. Kim, S.H., Kang, J. Y., Ahn, H.S., Jo, H.J., Kim, M.H., “Study of Leidenfrost mechanism in droplet impacting on hydrophilic and hydrophobic surfaces,” International Journal of Air Conditioning and Refrigeration, Vol. 21, 2013.


10. Jo, H.J., Kim, S.H., Kim, H., Kim, J., Kim, M.H., “Nucleate boiling performance on nano/microstructures with different wetting surfaces,” Nanoscale Research Letters, Vol.7, 2012, 242 (7pp).


9. Jo, H.J., Ahn, H.S., Kang, S.H., Kim, M.H., “A study of nucleate boiling heat transfer on hydrophilic, hydrophobic and heterogeneous wetting surfaces,” International Journal of Heat and Mass Transfer, Vol.54, 2011, pp.5643-5652.


8. Ahn, H.S., Jo, H.J., Kang, S.H., Kim, M.H., “Effect of liquid spreading due to nano/microstructures on the critical heat flux during pool boiling,” Applied Physics Letters, Vol.98, 2011, 071908-1~3.


7. Ahn, H.S., Kang, S.H., Jo, H.J., Kim, H., Kim, M.H., “Visualization study of the effects of nanoparticles surface deposition on convective flow boiling CHF from a short heated wall,” International Journal of Multiphase Flow, Vol.37, 2011, pp.215-228.


6. Kim, S., Kim, H.D., Kim, H., Ahn, H.S., Jo, H.J., Kim, J., Kim, M.H., “Effects of nano-fluid and surfaces with nano structure on the increase of CHF,” Experimental Thermal and Fluid Science, Vol.34, 2010, pp.487-495.


5. Ahn, H.S., Kim, H., Jo, H.J., Kang, S.H., Chang, W.P., Kim, M.H., “Experimental study of critical heat flux enhancement during forced convective flow boiling of nanofluid on a short heated surface,” International Journal of Multiphase Flow, Vol.36, 2010, pp.375-384.


4. Ahn, H.S., Lee, C., Kim, H., Jo, H.J., Kang, S.H., Kim, J., Shin, J.S., Kim, M.H., “Pool boiling CHF enhancement by micro/nanoscale modification of zircaloy-4 surface,” Nuclear Engineering and Design, 2010, Vol.240, pp.3350-3360.


3. Jo, H.J., Kim. H., Ahn, H.S., Kang, S.H., Kim, J., Shin, J.S., Kim, M.H., “Experimental study of pool boiling for enhancing the boiling heat transfer by hydrophobic dots on silicon surface,” Transactions of KSME B, Vol. 6, 2010, pp.655-663.


2. Ahn, H.S., Kim, H.D., Jo, H.J., Kang, S.H., Kim, M.H., “Experimental investigation on the pool boiling critical heat flux of water-based alumina and titania nanofluids on a flat plate heater,” Transactions of KSME B, Vol. 10, 2009, pp.729-736.


1. Kang, S.H., Ahn, H.S., Jo, H.J., Kim, M.H., Kim. H., Kim, J., “Experimental investigation of CHF enhancement on the modified surface under pool boiling,” Transactions of KSME B, Vol. 11, 2009, pp.840-848.